Industrial M12 Bulkhead Panel Mount USB Type-C Jack Socket

The Jinbeili M12 Bulkhead Panel Mount USB Type-C Jack Socket is a rugged industrial USB-C female connector designed for reliable power and data connectivity in machinery, industrial equipment, outdoor electronics, transportation systems, control panels, and other demanding environments. Its threaded M12 bulkhead mounting design enables secure installation through panels, enclosures, and chassis, while the sealed construction can provide IP65 protection when properly mated and installed, helping protect the connector interface against dust, water, moisture, vibration, and mechanical stress.

This industrial M12 USB-C socket combines the convenience of modern USB Type-C connectivity with a compact, panel-mount design suitable for applications where standard consumer USB connectors may not provide the required mechanical protection.

Five USB-C Configuration Options

To meet different power, charging, data, and signal requirements, Jinbeili can provide multiple USB-C pin configurations:

1. VBUS + GND – Power-only USB-C connection for DC power input, charging, and other power applications.
2. VBUS + GND + D+ + D− – USB 2.0 power and data connection.
3. VBUS + GND + D+ + D− + CC1 + CC2 – USB-C power and USB 2.0 data with CC-based device detection and charging functions.
4. VBUS + GND + D+ + D− + SBU1 + SBU2 – USB-C configuration supporting USB 2.0 data plus SBU sideband signals for customized applications.
5. VBUS + GND + CC1 + CC2 + SBU1 + SBU2 – Customized power, USB-C CC, and sideband signal configuration without USB 2.0 D+/D− data lines.

Custom Wiring and Termination

The M12 USB-C jack can be supplied with pre-attached 22AWG, 24AWG, or 26AWG wires, with standard wire lengths from 50mm to 1000mm. Wire ends can be supplied as stripped and tinned flying leads or customized with connectors such as JST PH-series or Molex headers, making the connector easier to integrate into existing wiring harnesses and control systems.

Custom USB-C Circuit Options

Jinbeili can also integrate customized circuitry into the USB-C jack according to application requirements:

• 5.1kΩ CC pull-down resistors: Two 5.1kΩ resistors can be connected from CC1/CC2 to GND for USB-C sink/device identification.
• 22kΩ or 56kΩ pull-up resistors: Customized resistor configurations can be added between VBUS and CC lines for specific charging applications, including customer requirements for iPhone 15, 16, and 17 series compatibility.
• USB PD trigger circuit: A USB Power Delivery trigger module can be integrated to request specified PD output voltages such as 9V, 12V, or 24V, subject to the selected PD protocol and power source.
• LED indicators: Optional translucent housings and integrated LEDs can provide visual indication of power or operating status.

The connector can support up to DC30V 5A, depending on the specific USB-C contact configuration, wire gauge, connector construction, and application conditions.

Typical Applications

Industrial machinery, outdoor equipment, transportation electronics, control panels, industrial computers, power input interfaces, battery-powered equipment, communication equipment, and customized electronic devices.

RoHS & REACH compliant. Factory certified to ISO9001 and IATF16949.

Frequently Asked Questions

Q1. Can you add 22kΩ or 56kΩ resistors to support charging for iPhone 15, 16, and 17 series devices?
Yes. Jinbeili can customize the USB-C jack with 22kΩ or 56kΩ resistor configurations between VBUS and the CC lines according to the customer’s charging application and circuit requirements. Compatibility should be confirmed with the specific charger, device, and charging protocol.

Q2. Can you integrate a USB PD trigger circuit into the M12 USB-C jack?
Yes. A customized USB PD trigger circuit can be integrated to request specified PD voltages such as 9V, 12V, or 24V, depending on the selected PD source and trigger design.

Q3. Can this USB-C jack handle DC30V 5A?
Yes. The connector can be designed for up to DC30V 5A, subject to the selected configuration, wire gauge, contact design, thermal conditions, and application requirements.

Q4. Can you provide different USB-C pin configurations?
Yes. Jinbeili can provide power-only, USB 2.0 data, CC, SBU, and other customized USB-C configurations.

Q5. Can the cable length and connector be customized?
Yes. Wire gauge, wire length, stripped/tinned ends, and connector termination can be customized according to the customer’s requirements.

Q6. Is the M12 USB-C jack waterproof?
It can provide IP65 sealing capability when properly mated and installed. The actual protection level depends on the complete mating and installation system.

Q7. Can you provide OEM/ODM customization?
Yes. Jinbeili supports customized USB-C circuits, wiring, connectors, LED indicators, pin configurations, and other OEM/ODM requirements.